Xilinx Alveo U200 Getting Started page 33

enabled
Details
Test Status
----------------------------------------------------------------------------
---
Test 11 [0000:02:00.1]
Description
Details
is not
Test Status
----------------------------------------------------------------------------
---
Validation completed. Please run the command '--verbose' option for more
details
Validation Summary
------------------
1 device(s) evaluated
1 device(s) validated successfully
0 device(s) had exceptions during validation
Validated successfully [1 device(s)]
- [0000:02:00.1] : xilinx_u200_gen3x16_xdma_base_1
Validation Exceptions [0 device(s)]
Warnings produced during test [0 device(s)] (Note: The given test
successfully validated)
Unsupported tests [1 device(s)]
- [0000:02:00.1] : xilinx_u200_gen3x16_xdma_base_1 : Test(s): 'Peer to
peer bar', 'Host memory bandwidth test', vcu
Note: The DMA bandwidth can vary depending upon NUMA/CPU affinity.
UG1301 (v2.2) August 19, 2022
Getting Started with Alveo Accelerator Cards
: Host memory is not enabled
: [SKIPPED]
: vcu
: Run decoder test
: Verify xclbin not available or shell partition
programmed. Skipping validation.
: [SKIPPED]
Chapter 5: Card Bring-Up and Validation
www.xilinx.com
Send Feedback
33