Subsequent Tare Weight; Data-Hold Function; See Second Decimal Point (Not Verified Value) - KERN KMF-TM Operating And Installation Instructions

7.5.1 Subsequent tare weight

The balance can be tared several times successively. For that select in the menu the
following setting:
• Menu setting:
[F5 Str]  [Str on] (see chap. 12.4.2)

7.6 Data-Hold function

When weighing is at standstill, the weighing value will be automatically kept for 10
sec in the display until the HOLD key is actuated. By this way sufficient time remains
to read the weighing value at your leisure.
 Start balance by pressing
 Place the items to be weighed and press

7.7 See second decimal point (not verified value)

Press and hold for about 2 s whilst weighed result is being shown. The second
decimal place will be shown for approx. 5 s.
KMF-TM-BA_IA-e-1310
value is kept in the display.
After unloading the balance, the weighing value remains
displayed for approx. 10 seconds, than the balance changes
automatically into the weighing mode.
The „HOLD" symbol disappears.
.
, the weighing
13