Adjustment is required after entering configuration data!
The size of the currently set adjustment weight will be
(example)
Confirm with
Place the adjustment weight carefully
Wait until stability display „STABLE" appears
After the adjustment the balance will carry out a self-test. Remove
adjusting weight during selftest, balance will return into weighing
mode automatically.
An adjusting error or incorrect adjusting weight will be indicated
by the error message; repeat adjustment procedure.
An adjusting error or incorrect adjustment weight will generate an
error message („Err 4"), repeat the adjustment process.
KMF-TM-BA_IA-e-1310
Confirm with
, [UnloAd] appears
Ensure that there are no objects on the weighing pan.
Wait for stability display "STABLE", then confirm with
displayed.
To change, select the digit to be altered by
numerical value by
, [LoAd] appears.
Confirm with
[PASS] is displayed.
.
, and the
29