KERN KMF-TM Operating And Installation Instructions page 83

Procedure:

 In weighing mode, press

 Press


 Operate adjustment switch; for position see chap.13


 Confirm with
 Ensure that there are no objects on the weighing pan.
 Wait for stability display "STABLE", then confirm with
 The size of the currently set adjustment weight will be
(example)
 Confirm with
KMF-TM-BA_IA-e-1310
Press , [Pin] is displayed
, and
appear
Press , „P2 CAL" will be displayed
Press , [dESC] is displayed
Press repeatedly until [CAL] will be displayed.
, [UnloAd] appears
displayed. The active digit is flashing.
To change, select the digit to be altered by
numerical value by
, [LoAd] appears.
repeatedly until [tCH] appears.
one after the other, [P1 SPd] will
.
, and the
33