Tcp/Udp Ports - ABB FBVi-2U4-4T User Manual

TCP/UDP PORTS

This page defines IP
use.
HTTPS/HTTP are used for this web configuration.
•
HTTPS is always enabled, though the port can be changed if required.
•
HTTP is disabled by default.
The BACnet ports are needed if the controller must communicate with other
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
ports that are open to the outside world, and the protocols those ports expect to
FBVi Web UI
FBVi-2U4-4T |
BACnet controllers over IP.
27