Bacnet Priority Array - ABB FBVi-2U4-4T User Manual

BACNET PRIORITY ARRAY

BACnet uses a command prioritization scheme for objects that control equipment or software
parameters that affect the operation of equipment connected to devices. The use of this command
prioritization scheme (commonly referred to as
which an object is controlled. Command Prioritization assigns unique levels of priority to the different
types of devices that can write values to a device. There are 16 prioritization levels with Level 1 being
highest and Level 16 the lowest. For example:
Priority Level
1
2
3
4
5
6
7
8
BACnet defines the types of objects that are either required or may optionally support the command
prioritization scheme.
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
Application
Manual-Life Safety
Automatic-Life Safety
Available
Available
Critical Equip. Control
Minimum On/Off
Available
Manual Operator
FBVi-2U4-4T |
Priority Array) allows a device to determine the order in
Priority Level
9
10
11
12
13
14
15
16
BACnet Networking
Application
Available
Available
Available
Available
Available
Available
Available
Available
21