Notes On This Manual; Additional Information - Growatt MIN 2500TL-XA Installation & Operation Manual

1 Notes on this manual

1.1 Validity
This manual describes the assembly, installation, commissioning and maintenance of the
following Growatt Inverter model:
MIN 2500 TL-XA
MIN 3000 TL-XA
MIN 3600 TL-XA
MIN 4200 TL-XA
MIN 4600 TL-XA
MIN 5000 TL-XA
MIN 6000 TL-XA
This manual does not cover any details concerning equipment connected to the MIN TL-
XA. Information concerning the connected equipment is available from the
manufacturer of the equipment.
1.2 Target Group
This manual is for qualified personnel. Qualified personnel have received training and
have demonstrated skills and knowledge in the construction and operation of this
device. Qualified Personnel are trained to deal with the dangers and hazards involved in
installing electric devices.

1.3 Additional information

Find further information on special topics in the download area at www.ginverter.com
The manual and other documents must be stored in a convenient place and be
availableat all times. We assume no liability for any damage caused by failure to observe
these instructions. For possible changes in this manual, Shenzhen Growatt New Energy
CO.,LTDaccepts no responsibilities to inform the users.
1.4 Symbols in this document
1.4.1 Warings in this document
A warning describes a hazard to equipment or personnel. It calls attention to a procedure
or practice, which, if not correctly performed or adhered to, could result in damage to or
destruction of part or all of the Growatt equipment and/or other equipment connected
to the Growatt equipment or personal injury.
Symbol
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
DANGER
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
WARNING
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
CAUTION
1
Description
NOTICE is used to address practices not related to personal injury.
NOTICE
Information that you must read and know to ensure optimal
operation of the system.
Information
1.4.2 Markings on this product
Symbol
Electrical voltage
Risk of fire or explosion
Risk of burns
Wait for 5minutes before engaging in the indicated action
Point of connection for grounding protection
Direct Current (DC)
Alternating Current (AC)
The inverter has no transformer
Read the manual
CE mark
The inverter complies with the requirements of the applicable CE
guidelines
Discard this product according to local regulations
Explanation
2