Related Manuals for Growatt TL-XH Series
Summary of Contents for Growatt TL-XH Series
- Page 1 Energy Storage System Operating Mode Setting Global Leading Inverter Brand 1.33+ 200+ 100+ million Inverter Ship Globally Professional R&D Engineers Patents and Copyrights Countries with Systems Installed...
-
Page 2: Inverter Models
1、 Inverter Models After TL-XH series connect with BDC, the time period of the BDC can be set. The following models include in this series: MIN 2500TL-XH、MIN 3000TL-XH、MIN 3600TL-XH、MIN 4200TL-XH、MIN 4600TL-XH、MIN 5000TL-XH、MIN 6000TL-XH Please make sure the inverter is the latest firmware version and is a single-phase inverter model with RS485 port. - Page 3 The OLED can only set three time periods, and the start time of the latter time period must be greater than the end time of the previous time period. First a single touch to enter the " Set Parameter" interface, select "Advanced " and enter ...
- Page 4 3.2. Setting through ShineServer If the inverter is monitored online via the Growatt monitoring system, you can setting the mode and time periods via ShineServer. First login to ShineServer, click "Plant" and go to the "Device List" interface, select to enter "Min", you can see the inverter list.
- Page 5 3.3. Setting through ShinePhone If the inverter is monitored online via the Growatt monitoring system, you can set mode and time periods via the ShinePhone. First login to the shinephone, click on "Plant" to see the inverter list. Select the inverter, enter the details page and click the “Control”...
- Page 6 Figure.5. Indication of setting the mode and time periods on ShinePhone 3.4. Setting through ShineBus To set up the inverter with ShineBus, you need connect the inverter to the host computer with the communication cable, connect the RS485 port to the BAT COM 1-2 pin of the inverter, and connect the USB port to the host computer.
- Page 7 Figure.6. Indication of read information of inverter on ShineBus Figure.7. Indication of setting the mode and time periods on ShineBus Figure.8. Indication of reading the mode and time periods on ShineBus...
- Page 8 4、 BDC Mode Real Test The MIN series inverters have realized that the inverters operate different priority modes in different time periods. Set the load first, battery first and grid first separately. We can observe the priority mode of the device through the monitoring device. Taking the PV1000W and the load power 2000W as examples, the load first, battery first and grid first operation status are observed respectively.
- Page 9 Figure.10. Battery first Figure.11.Grid first...
Need help?
Do you have a question about the TL-XH Series and is the answer not in the manual?
Questions and answers