Fixed The Inverter On The Wall; Mounting The Inverter - Growatt MIN 2500TL-XA Installation & Operation Manual

Please make sure the inverter is installed at the right place.The inverter can't install
Ø
close to trunk.
5.3

Mounting the Inverter

5.3.1 Mounting the Inverter with bracket
In order to avoid electrical shock or other injury, inspect existing
electronic or plumbing installations before drilling holes.
DANGER
Fix the mounting bracket as the figure shows. Do not make the screws to be flush to
Ÿ
the wall. Instead, leave 2 to 4mm exposed.
15
250

5.3.2 Fixed the inverter on the wall

Falling equipment can cause serious or even fatal injury, never
mount the inverter on the bracket unless you are sure that the
mounting frame is really firmly mounted on the wall after carefully
checking.
WARNING
Rise up the inverter a little higher than the bracket. Considered the weight of
Ø
them.During the process please maintain the balance of the inverter.
Hang the inverter on the bracket through the match hooks on bracket.
Ø After confirming the inverter is fixed reliably, fasten one M6 safety-lock sockets
head cap screws on the right or left side firmly to prevent the inverter from being
lifted off the bracket.
16