Notes On This Manual; Additional Information - Growatt MIN 7000TL-X2 Installation & Operation Manual

1 Notes on this manual

1.1 Validity
This manual describes the assembly, installation, commissioning and maintenance of the
following Growatt Inverter model:
MIN 7000 TL-X2
MIN 8000 TL-X2
MIN 9000 TL-X2
MIN 10000 TL-X2
This manual does not cover any details concerning equipment connected to the MIN TL-
X2( e.g. PV modules). Information concerning the connected equipment is available from
the manufacturer of the equipment.
1.2 Target Group
This manual is for qualified personnel. Qualified personnel have received training and
have demonstrated skills and knowledge in the construction and operation of this
device. Qualified Personnel are trained to deal with the dangers and hazards involved in
installing electric devices.

1.3 Additional information

Find further information on special topics in the download area at www.ginverter.com
The manual and other documents must be stored in a convenient place and be available
at all times. We assume no liability for any damage caused by failure to observe these
instructions. For possible changes in this manual, GROWATT NEW ENERGY CO.,LTD
accepts no responsibilities to inform the users.
1.4 Symbols in this document
1.4.1 Symbols in this document
A warning describes a hazard to equipment or personnel. It calls attention to a procedure
or practice, which, if not correctly performed or adhered to, could result in damage to or
destruction of part or all of the Growatt equipment and/or other equipment connected
to the Growatt equipment or personal injury.
Symbol
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
DANGER
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
WARNING
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
CAUTION
1
description
NOTICE is used to address practices not related to personal injury.
NOTICE
Information that you must read and know to ensure optimal
operation of the system.
Information
1.4.2 Markings on this product
Symbol
Electrical voltage!
Risk of fire or explosion！
Risk of burns
Operation after 5 minutes
Point of connection for grounding protection
Direct Current (DC)
Isolation Switch
Alternating Current (AC)
Read the manual
CE mark.
The inverter complies with the requirements of the applicable CE
guidelines.
The inverter must not be disposed of with the household waste.
Explanation
2