HMS Networks Anybus Communicator ABC4021 User Manual page 55

Reset to Factory Settings
3. While holding the reset button, reconnect the Communicator to power.
Figure 44. Hold Reset button and reconnect power
4. Release the reset button.
The Communicator enters exception state.
5. Reboot the Communicator.
Result
When the Communicator has successfully rebooted, the Communicator configuration is reset to the factory
default configuration or the current configuration after firmware upgrade.
To Do Next
To ensure that the Communicator built-in web-interface is synchronized.
1. Open the the Communicator built-in web interface.
2. Navigate to the Files & firmware page and click Revert.
Figure 45. Files & firmware, Revert
SCM-1202-198 Version 1.0
® ™
Anybus Communicator - EtherCAT Slave to PROFIBUS DP Device
Page 51 of 56