Safety Precautions - H-KING FRENZY Instruction Manual

WARNING
This radio controlled model is not a toy. It requires skill to fly and is not recommended
for use by beginners without assistance from an experienced model pilot. It should
not be operated by children without the supervision of a suitably experienced adult.
HobbyKing reserves the right to modify the specification of this model at any time.

SAFETY PRECAUTIONS

1. Do not attempt to repair or modify this aircraft with non-factory parts.
2. Never fly this model over roads, railway lines, near to power lines, airports, and do not
fly this model in excessively strong winds, rain, or thunderstorms.
3. Do not fly or launch the model towards people.
4. Keep hands and face away from the rotating propeller at all times.
5. We strongly recommend that all fixings and fasteners used in the construction of this
model are checked regularly for integrity. Failure to do so could cause a crash, injury to
yourself or others around you.
6. We only recommend the use of 2.4GHz radio equipment with this model.
DISCLAIMER
1. This radio controlled model is not a toy. Used incorrectly it is capable of inflicting
serious injury to persons or damage to property. The owner/pilot assumes all
responsibility for any damage to persons or property resulting from the use of this
product.
2. The manufacturer and distributor decline all responsibility for any liability arising
from use of this product.
3. It is very important that you follow all instructions for assembling and the setting up
of this model. Failure to do so could result In a loss of control and possibly a crash.
EPO
EPO foam is a very tough and durable material perfect for the manufacture of model
aircraft. When using screwed fixings with EPO components it is important to tighten the
screws only enough to provide a firm fixing, do not over-tighten. Excess tightening
could result in the foam material becoming compressed, possibly damaging
or distorting the part. Take care to ensure that all screws are tightened sufficiently to
provide a firm fixing, do not over-tighten. We recommend that all fixings are checked
regularly for security and safety purposes..