Download
Share
Print this page
H-KING F-35 Instruction Manual
  1. Manuals
  2. Brands
  3. H-KING Manuals
  4. Toy
  5. F-35
  6. Instruction manual

H-KING F-35 Instruction Manual

5 mm pp kit
Hide thumbs

Advertisement

Quick Links

Download this manual
INS TRU C TI O N M ANUA L

Advertisement

loading
Need help?

Need help?

Do you have a question about the F-35 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for H-KING F-35

Summary of Contents for H-KING F-35

  • Page 1 INS TRU C TI O N M ANUA L...

  • Page 3: Packing List

    Packing list: 1: PP F35 fuselage *1 2: Carbon strip for fuselage *3 3: Carbon strip for vertical tail *2 4: Pull rod *2 5: Motor mount *1 6: Quick rod adjuster *2 7: Hinge *2 8: M3 screws *4 9: wood strip *2 10: Hook and loop tape *1 Tools:...
  • Page 4 Glue the 2 pcs horizontal fuselages using Then put the 3 pcs carbon strips into horizontal hot glue sticks. fuselage using No.502 glue. Stick the 2 pcs carbon strips on vertical tail using foam glue. Applying foam glue on 2 pcs nose.
  • Page 5 Press the 2 pcs vertical fuselages into horizontal fuselage Important: Wait 3 mins after applying foam glue, Important: don’t use glue! then assemble the 2 pcs nose. Make sure 2 pcs nose trim. Especially for step. Applying glue on 2 pcs vertical fuselages using Then assemble bottom fuselage on vertical fuselage.
  • Page 6 Also don’t forget to reinforce vertical fuselage using Then assemble vertical fuselage and bottom fuselage hot glue sticks. on horizontal fuselage using hot glue sticks. Assemble the nose on fuselage using hot glue sticks Reinforce nose using hot glue sticks after assembly. or foam glue, make sure the motor mount location must be flat! Install vertical tail on fuselage using hot glue sticks.
  • Page 7 Assemble prop on motor. Notice the prop’s direction. Assemble motor mount on fuselage, then reinforce motor mount using a little hot glue sticks. Install arm on servo and electrify all servos to make Install wood strip in the hole using No.502 glue. sure the arm perpendicular to servo.
  • Page 8 Install hinge into the hole on fuselage with foam glue. Cut bevel in the end of bottom cover using knife. Notice must let pull rod through the wood strip’s hole. Install the 2 pcs wood clips in the bottom cover using Then the wood clip can block bottom fuselage foam glue.
  • Page 9 C of G is on the front of the motor mount 11.5cm as PP F35 just has tail control, so we need set delta shown in the picture above. wing mixed control on radio (Elevator and aileron mixed control). We advise set elevator parameter to 60/70 and set aileron parameter to 90/100 on radio.