Engine Lubricants And Sealants - Volvo EPA2007 D13F Reference Manual

52 SPECIFICATIONS

Engine Lubricants and Sealants

Use only the following recommended sealing compounds and lubricants.
Note: All genuine cylinder head gaskets are pre-coated and do not require any type of
sealing compound. When installing new gaskets, clean and degrease gasket sealing
surfaces to avoid leaks.
Location
Cup plugs/threaded plugs
Cylinder liner seat
Oil filter seal
Holding metal parts in place
Valve stems and guides
Engine front cover/flywheel
housing/timing gear cover
Engine parts, fasteners and washers
Exhaust manifold studs
Oil cooler assembly O-ring
O-rings, coolant, EPDM
O-rings (except as noted)
Threaded sensors
Turbocharger mounting nuts
Note: All part numbers are for
reference only, you should always refer
to truck BOM's before ordering parts.
Sealant or Lubricant
Loctite® 277 or equivalent / Teflon®
thread sealer
1161231 sealant
Clean engine oil
Petroleum jelly
Clean engine oil
3092340 sealant
Clean engine oil
High temperature 1161929 anti-seize
Clean engine oil
Clean coolant, or Dow Corning® 55
Dow Corning® 55 O-ring lubricant
Sealing compound on threads
1161929 anti-seize