Volvo EPA2007 D13F Reference Manual page 23

General Tightening Torques
M6 standard bolt 8.8
M8 standard bolt 8.8
M10 standard bolt 8.8
M12 standard bolt 8.8
M14 standard bolt 8.8
M16 standard bolt 8.8
General Tightening Torques
Bolts that have been torque-tightened only, can be reused.
Torque-tightened bolts, angle-tightened bolts, or yield-limit-tightened bolts:
Grade 8.8
Grade 10.9
Grade 12.9
Note: Check bolts before reusing. Bolts showing damage, for example cut marks on
the underside or distortion of the flats, should be discarded.
General Tightening Torques
Intermediate front engine mounting brackets (accessories brackets)
Step 1
Step 2 (angle tightening)
Front engine mounting
Bracket to engine block
Bracket to engine cushion
Cushion to cross member
SPECIFICATIONS 17
10 ± 1.5 Nm (7.4 ± 1 ft-lb) (89 ± 13 in-lb)
24 ± 4 Nm (18 ± 3 ft-lb)
48 ± 8 Nm (35 ± 6 ft-lb)
85 ± 15 Nm (63 ± 11 ft-lb)
140 ± 25 Nm (103 ± 18 ft-lb)
190 ± 35 Nm (140 ± 26 ft-lb)
Should not be reused
Can be reused
Can be reused
105 ± 15 Nm (77.5 ± 11 ft-lb)
60 ± 5 degrees
275 ± 45 Nm (203 ± 33 ft-lb)
140 ± 25 Nm (103 ± 18 ft-lb)
85 ± 15 Nm (63 ± 11 ft-lb)