Volvo EPA2007 D13F Reference Manual page 161

7. Install the P-clamp and screws to secure the AFI harness and fuel supply line
to the diffuser.
8. Fill the engine cooling system with the recommended coolant using the coolant
extractor.
9. Install all previously removed cables to the ground (negative) battery terminals.
10. Perform Aftertreatment Injector Adaptive Factor Reset using VCADS/Premium
Tech Tool (PTT).
11. Start the engine, check for leaks and proper operation. After shutdown, replenish
fluids as necessary.
Cleaning
1. Apply the parking brake and place the shift lever in neutral.
2. Disconnect all cables from ground (negative) battery terminals to prevent personal
injury from electrical shock.
3. Remove P-clamp screws securing the AFI harness and fuel supply line.
4. Disconnect the AFI fuel supply line. Collect any residual fuel that might be in the
fuel line in a suitable container.
BASIC SERVICE 155
W2005656
W2005656