36 SPECIFICATIONS
Additional Bottom Of Engine Components
Lube Valve Housing
Attaching Screws (4)
Crankshaft Bearing Caps
Discard screws with four marks when removed and substitute new screws.
Step 1. Attaching Screws
Step 2. Angle tighten
Connecting Rod Bearing Caps
Discard screws with four marks when removed and substitute new screws.
Tighten screws in a cross pattern
Step 1. Attaching Screws
Step 2.
Step 3. Angle tighten
Oil Pan Drain Plug
Oil Pump Attaching Screws
Nozzle Attaching Screws, Piston
Cooling
Do not reuse
Hand start all, then tighten to 48 ± 8 Nm
(35 ± 6 lb-ft)
150 ±20 Nm (111 ± 15 lb-ft)
120° ± 5°
20 ±3 Nm (15 ± 2 lb-ft)
60 ± 3 Nm (44 ± 2 lb-ft)
90° ± 5°
60 ± 10 Nm (44 ± 7 lb-ft)
24 ± 4 Nm (18 ± 3 lb-ft)
24 ± 4 Nm (18 ± 3 lb-ft)