Continuation Of Adjustments - Volvo EPA2007 D13F Reference Manual

BASIC SERVICE 167
W2033403
7. Using a 3.6 mm (0.142 inch) feeler gauge, 85111377, check the clearance between
the brake rocker arm roller and the cam lobe. If the clearance is incorrect, repeat the
brake rocker arm clearance adjustment.
8. Mark the respective rocker arm as each valve adjustment is completed.

Continuation of Adjustments

Continue the procedure by barring the engine to the appropriate timing marks and
adjusting the valves and unit injectors at each of the remaining cylinders. Follow
the steps described above to adjust the inlet and exhaust valves, and unit injector at
each cylinder.
For engines equipped with the Volvo compression brake, tighten the plate spring
attaching screws to specification after the valve and unit injector adjustments have
been completed.