Bolt Head Punch Marks
CAUTION
Bolts for the following components may be reused four times only. The heads of
these bolts must be marked with a punch (A) after each use. When re-using bolts,
the bolt head and threads must be lubricated with clean engine oil.Do not lubricate
new bolts as they are already lubricated.
•
CYLINDER HEAD BOLTS
•
CAMSHAFT and ROCKER SHAFT BOLTS
•
FLYWHEEL BOLTS
•
MAIN BEARING BOLTS
•
CONNECTING ROD BOLTS
CAUTION
Do not re-use timing gear mounting plate bolts.Do not re-use timing gear
mounting bolts.Do not re-use piston spray nozzle bolts
SPECIFICATIONS 49
W2005481