Engine Stiffening Frame
Step 1: Tighten the bolts 1-24 in numerical order ....................40 ± 5 Nm (30 ± 4 ft-lb)
Step 2: Tighten the bolts 1-24 in numerical order (angle tightening) ..... 90 ± 5 degrees
Note: These bolts should not be reused.
Note: Apply sealant outside the groove as illustrated, maximum 20 minutes before
mounting.
Thickness of sealant bead: 2 mm (0.079 inch)
SPECIFICATIONS 19
T2022728
T2022337