Figure 4 - Storage Tek; T10000D Tape Rive Ear ) - Oracle StorageTek T10000D Manual

Figure 4 - StorageTek T10000D Tape Drive (Rear)
The bottom of the StorageTek T10000D Tape Drive (Figure 5) provides one
additional physical interface; the Operator Panel Port. This port is used to provide
general module status as well as additional control input access when the drive is
rack-mounted.
*The additional port pictured is the Manufacturing Servo Interface. This interface
is not operational in any of the modes of operation; therefore, it is not listed in the
interfaces table (Table 2) below.
Page 15 of 51
© Copyright 2017 Oracle Corporation
This document may be freely reproduced and distributed whole and intact including this Copyright notice.