Table of Contents
Advertisement
3
CH: 002
LCD Display
1. 1. 1. 1. 1. Power Switch:
Power Switch:
Power Switch:
Power Switch:
Power Switch: Turns the transmitter ON.
2. 2. 2. 2. 2. LCD Display:
LCD Display:
LCD Display:
LCD Display: Information screen appears when the power is switched on.
LCD Display:
3. 3. 3. 3. 3. Red LED:
Red LED:
Red LED:
Red LED:
Red LED: Lights up briefly when power is switched on.
4. 4. 4. 4. 4. Lock Button:
Lock Button:
Lock Button:
Lock Button: Locks all microphone controls.
Lock Button:
5. 5. 5. 5. 5. Set Button:
Set Button:
Set Button:
Set Button:
Set Button: This button is used to enter and save changes to the
transmitter settings.
6. 6. 6. 6. 6. Up and Down Buttons:
Up and Down Buttons:
Up and Down Buttons:
Up and Down Buttons: These buttons scroll up and down between setup
Up and Down Buttons:
screens on the LCD display. They are also used to enter changes in each
setup screen.
7. 7. 7. 7. 7. Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack: Optional battery charger plugs in here
(for NiMH batteries only).
8. 8. 8. 8. 8. Battery Compartment:
Battery Compartment:
Battery Compartment:
Battery Compartment:
Battery Compartment: Bottom section of microphone barrel unscrews to
reveal battery compartment.
LOCK
1
DOWN
2
8
Battery
Compartment
Controls and Functions
Wireless Transmitter
4
LOCK
SET
6
HM-900
End View of Microphone
Handheld Microphone
5
SET
6
UP
7
6
Advertisement
Table of Contents
