Table of Contents
Advertisement
Operating Instructions
CH: 001
L i g h
3
1. Transmitter Mute: The MUTE switch turns the transmitter's audio signal on or off.
The audio is off when the red LED is flashing.
2. Gain Adjust: When changing microphones or users, it may be necessary to adjust
the transmitter gain based on differing microphone sensitivities and voice levels.
• To adjust the microphone gain, turn the MT dial clockwise to increase the gain
and counterclockwise to decrease the gain.
• If you are using a high impedence source, such as a guitar, it will be necessary to
adjust the GT dial. Using a high impedance source requires a special cable.
Contact LightSPEED Technologies for more information.
3. Battery Life Indicator: The battery life is shown on the primary screen of the LCD.
The 7-step fuel gauge acts as a detailed guide to show the actual life of the battery.
4. Battery Type: The transmitter will operate with either standard Alkaline Batteries or
Nickel Metal Hydride (NiMH) Rechargable Batteries. Since these types of batteries
have different characteristics, it is important to set the transmitter to the appropriate
type of battery being used so that the battery life indicator will operate properly.
17
CH: 001
720.250M
1
t S P E
E D
NOTE: Do not mix battery types.
WARNING: Do not use NiCad batteries!
They will not charge properly and may
cause damage to the transmitter.
Wireless Transmitter
2
Gain Adjust
GT
MT
L ig h
t S P E
Belt-pack
E D
Alkaline
4
NiMH
Nickel Metal Hydride
Rechargable
Advertisement
Table of Contents
