Operating Instructions: Audio Inputs - Lightspeed Delta X6 Manual

1/4" MIC IN
3.5mm AUX IN
Wired Microphone Operation
1. To use a wired microphone, plug the wired microphone cable connector into the
1/4" input labeled MIC IN on the back panel.
2. Rotate the AUX IN/MIC IN control clockwise to increase the volume. When voice
is spoken into the wired microphone, amplified sound should be heard over the
speaker.
Both wired and wireless microphones can be used simultaneously as there is a
built-in mixer to mix or balance both signals.
Input from External Audio Equipment
Below are instructions on how to connect an external audio source such as an MP3
Player, CD/DVD, TV/VCR, or computer to the DELTA X6.
3. Connect a cable from an audio source to the 3.5mm jack labeled AUX IN on the
back of the DELTA X6.
4. With the DELTA X6 turned on, adjust the AUX IN / MIC IN volume knob on the top
of the unit to a desired level.
NOTE: When hooking up auxiliary equipment, you may
need an adaptor depending on the connections available.
1
MIC IN
AUX IN
3
AUX OUT
AUX OUT
VOLUME
AUX OUT
Operating Instructions
Audio Inputs
Control Panel Top View
2 4
SPEAKER OUT
DC CHARG INPUT
MODEL NUMBER
BC-DELTA-12V
Back Panel View
Back Panel
AUX IN/MIC IN
Control Knob
(SWITCHED)
FUSE
4A 250V
ONLY
8