Address Switch Setting - Sanyo ECO-i AHX0752 Technical Data Manual

4. System Controller

■ Address switch setting

SW1
Main/sub selection switch
OFF: System controller operates as main controller.
ON: System controller operates as sub-controller.
ALL/ZONE mode selection switch
ALL mode:
All indoor units can be controlled by system controller
ZONE 1, 2, 3, 4 mode:
Indoor units in one of zone 1, 2, 3, or 4 can be controlled
by system controller. All indoor units cannot be set.
ALL mode OFF
ZONE 1 mode OFF
ZONE 2 mode
ZONE 3 mode OFF
ZONE 4 mode
1
Central control/Remote control mode selection switch.
OFF: Central control mode.
Individual setting by remote controller can be inhibited by
system controller.
ON: Remote control mode.
2
Setting by system controller is inhibited by other central
control equipments.
Central control Main/Sub selection switch
(OFF: Main, ON: Sub)
3
1 When AMY adaptor etc. is used with system controller,
set the switch to ON position.
2 When only one system controller is used, set the switch to
OFF position.
3 Except 1 , when multiple system controllers are used,
set only one system controller to OFF position others to
4
ON position.
ALL mode system controller to be OFF position.
(recommended)
(Central control) button operation switch
5
OFF: (Central control) button operation is permitted.
ON : button operation is inhibitted.
*All switches are OFF position at shipment.
6
7
8
2 3 4 5
OFF OFF
OFF ON
ON OFF OFF ON
ON ON
ON ON ON
Control of W-3WAY ECO-i SYSTEM
ON
1 2 3
OFF
3-50
SW1
4 5 6 7 8
2046_M_I