Sanyo ECO-i AHX0752 Technical Data Manual page 98

4. System Controller
K:CHECK button
L:CENTRAL
CTRL
M:SET button
1
N:CL button
2
O:VENTILATION button
3
4
5
6
7
8
This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
button Use this button to inhibit individual operation by remote controller as
follows:
1: Individual ON/OFF operation is inhibited.
2: Individual ON/OFF, MODE and Temperature setting operation is
3: Individual MODE and Temperature setting operation is inhibited.
4: Individual MODE operation is inhibited.
No indication: Central control is cleared.
This button is used for setting indoor unit's address when installing the
air conditioner.
NOTE
Do not use the SET button for normal operation.
Use this button to reset the filter sign
The air conditioner has the timer for the filter and informs you when the
filter needs cleaning.
Use this button when you installed a fan available in the market.
Pressing this button turns on and off the fan.
When turning off the air conditioner, the fan will also turned off. While
the fan is operating,
If
installed.
inhibited.
(Individual operation)
will appear in the display.
is displayed when pressing the ventilation button, no fans are
3-44
Control of W-3WAY ECO-i SYSTEM
.
2132_M_I