Mechanical Specification; Module Drillhole Dimension - Kontron ETX-CD User Manual

3.8

Mechanical Specification

» 95.0 mm x 114.0 mm
» Hight approx. 12mm (0.4")
CAD drawings are available at
3.9

Module Drillhole Dimension

The not shown drill holes match with the ETX® specification.
The maximum height of electrical components on the bottom side of the module is
specified with 2.0mm in the ETX@ specification. On the ETX@-CD the Southbridge is
soldered on the bottom side and Intel specified the ICH7 with 2.28mm ± 0.21mm
19
EMD CustomerSection
ETX®-CD / Specification