Compak BOLT User Manual page 13

Table of Contents

Advertisement

On FRESH MODE once the grind cycle is
initiated, it can be paused by pressing the lower
activation button ( ). The cycle will pause, and
will complete the timed grind cycle as long as the
lower activation button is pressed again within 10
seconds. After 10 seconds of inactivity, the grind
cycle will reset to the complete cycle time.
Grind pause can be activated or deactivated
by pressing the lower pulse button ( ). First,
set up by following these steps: MENU /
SETTINGS / GRIND PAUSE.
9.4.
TOUCH MODE
In this mode of operation when making the
selection of single, double or triple* doses of
coffee by pressing the appropriate numeric
TFT icon screen (
) starts grinding the
selected dosis without the need to actuate
the lower dose button (
The time set for that dose will decrease to
zero, at which point the dose ends.
On FRESH MODE once the cycle starts
grinding using the lower dose button (
and is pressed again, the grinding cycle will
stop. If within 10 seconds it is pressed again,
it will complete the remaining time of the
original dose time setting. After 10 seconds
of inactivity the grinder will return to standby
mode.
To pause by pressing the lower activation
button (
), you can enable or disable,
accessing MENU / SETTINGS / GRIND
PAUSE.
On FRESH MODE , pause grinding may also
be performed by pressing the active icon on
the TFT display (
). This pause cannot be
enabled or disabled via the MENU.
K09650H00 | PROC-CAL/002/03 USER MANUAL | V. 06/04/2022
).
)
9.
OPERATION
9.5.
DETECTION MODE
In this operating mode, the grinder detects
the presence of the portafilter through
the movement of a fitted Tag. When the
portafilter with the mounted Tag comes
in range, the system identifies it and
automatically grinds DOSE 2 by pressing
the lower portafilter button (
Once Dose 2 is detected, you have 5 seconds
to press the lower button (
cancel the selection, you can press 1 or 3* (if
the Dose 3* is activated) on the TFT screen
(
). If after 5 seconds, the lower button is
not pressed (
), the grinder will return to the
standby mode.
*Triple dose only can be activated on FRESH MODE
9.6.
TAMPER
9.6.1. Fixed Tamper (Optional)
Position the portafilter below the tamper and
push up to tamp the ground coffee (Fig. 5).
Fig. 5
) once.
). If you want to
13

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BOLT and is the answer not in the manual?

Questions and answers

Table of Contents