User Parameters (For Facsimile) - Kyocera KM-F1060 Quick Manual

General Description
Your machine has several basic settings (User Parameters) to help you keep records of the documents you send or
receive. For example, the built-in clock keeps the current Date and Time, your LOGO and ID Number to help identify you
when you send or receive documents.
These parameters can be programmed via your PC by using the Configuration Editor included in the Document
Management System CD (with the machine).
Follow the Operating Instructions included in the Document Management System CD.
Setting the User Parameters
1
6
CHARACTER ID
Enter your Character ID (Up to
16 characters and digits)
Ex: HEAD OFFICE
NOTE
20
Getting To Know Your Machine

User Parameters (For Facsimile)

2
DATE & TIME
mm-dd-yyyy 12:00
Enter the new Date and Time.
Ex: mm-dd-yyyy 15:00
7
CHARACTER ID
HEAD OFFICE
1. Special characters, such as Å, Ä, Ö, Ü, Æ, è and é cannot be used for Character ID.
2. To correct a mistake, use
number or character, press
to clear all numbers or characters, press
beginning of the number or character field.
3. The current Date & Time must be set because it is required by the Telephone Consumer
Act of 1991.
4. Your Company Name or your name must be set as your LOGO because it is required by the
Telephone Consumer Act of 1991.
3
DATE & TIME
8
ID NO.
Enter your ID (Up to 20 digits)
(Press
Ex: 201
or to move the cursor to the right side of the incorrect
then reenter the new number or character. If you wish
CLEAR
when the cursor is positioned at the
CLEAR
mm-dd-yyyy 15:00
to add a space)
SPACE
555
SPACE
1212
SPACE