Kyocera KM-F1060 Quick Manual page 35

Info.
Code
456 • Machine received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing, the machine received a document.
• Machine was requested to relay a document.
492/493/ Communication error occurred while receiving.
494
495 Telephone line disconnected.
501/502/ Communication error occurred using the internal V.34
503/504 Modem.
540/541/ Communication error occurred while transmitting.
542/
543/544
550 Telephone line disconnected.
552/553/ Communication error occurred while receiving.
554/555
580 Sub-address transmission to a machine that has no
Sub-address function.
581 Sub-address Password transmission to a machine
that has no Password Sub-address function.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
718 Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size loaded
in the Paper Tray(s).
730 Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
731 The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request was
received.
800/814/ Machine was requested to relay a document or
816/825 Confidential Communication but has no capability.
Continued on the next page...
Meaning Possible Action
1. Print a File List and check the contents.
2. Wait until machine finishes printing.
Check with the other party.
Check with the other party.
Check with the other party.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Reload the document and send again.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
Check the document size and resolution.
Ask sender to resend in a supported size and
resolution.
Check that the Fax Parameter No. 158 (PC
Remote Update) is set to "Valid".
Request the sender to resend the Relay
Transmission Request after the reserved
communication is finished.
Check with the other party.
Page
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
35