Discharging - MG MG4 Owner's Handbook Manual

STARTING & DRIVING

Discharging

The vehicle is equipped with a discharge function, this
can covert the high voltage DC power in the high-voltage
battery pack into domestic AC power.
This discharge function can be realized by using a discharge
kit.
Note: Users have the opportunity to purchase the
discharge kit from an MG Authorised Repairer.
To use the discharge function, follow the instructions
below:
1 Unlock the vehicle and access the AC charging port
(the charging port is also the discharging port).
2 Insert the discharge gun connector into the discharge
port socket. When fully connected the discharge port
indicator will illuminate blue.
3 Access the energy management interface in the
infotainment display screen, ensure the cut-off power
of discharge is set.
discharging button, the electronic lock will lock the
discharge gun in place and the vehicle will enter the
discharge state. At this time, do not attempt to
180
After setting, click the start
remove the discharge gun using force, this will damage
the locking mechanism.
4 The user is able to click the stop discharging button in
the infotainment display screen to stop the discharge,
or stop the discharge after the power is discharged to
the set cut-off value. At this time the electronic lock
will automatically be released and the discharge gun
can be removed.
5 Make sure there is no debris or foreign matter in the
charging port, fit the charging port cover and close the
charging point door.
Note: After the vehicle starts discharging, if the
infotainment display goes off, the vehicle will still
maintain the discharging condition.
Note: The current power status and available driving
range can be displayed on the instrument cluster.
Note: During the discharge process, the user can still
set the discharge power cut-off point.
Note: During discharge, the vehicle cannot be placed
in "READY" mode.
Note: Using the discharge function will reduce the
driving range of the vehicle.