Table of Contents
Advertisement
AIR CONDITIONING AND AUDIO SYSTEMS
System On/Off
Touch the System On/Off Button on the control interface
to switch the system on or off.
Cooling On/Off
Touch the A/C Cooling On/Off Touch Button to turn the
A/C cooling function ON/OFF.
Note: A small amount of water may remain in the air
conditioner after usage, this may produce a peculiar
smell. If this is a particular issue, it is recommended to
switch off the cooling function and run the blower for
a while.
Auto Mode
Set the target temperature required and then press the
AUTO touch button to enable the auto mode function. In
auto mode, the air distribution mode, blower speed and
so on are automatically adjusted to reach and maintain the
required temperature.
Manually adjust the air distribution mode or blower speed
to exit auto mode. In this case the AUTO indicator will
extinguish.
90
Air Recirculation Mode
Touch the air recirculation mode touch button as needed
to adjust the air recirculation mode.
During internal recirculation mode, the A/C
system circulates the air inside the vehicle to meet the
requirements of rapid cooling or heating, and at the same
time, it can prevent the outside dirty air from entering the
vehicle.
During the external circulation, the A/C system
draws air from outside the vehicle to ensure fresh air enters
the vehicle.
During the automatic circulation, the A/C
system automatically adjusts the internal or external
circulation according to the actual situation.
Note: Leaving the system in internal recirculation
mode can cause the windscreen to mist.
happens, turn on the defrost/demist mode.
If this
Advertisement
Table of Contents
