Table of Contents
Advertisement
STARTING & DRIVING
Intelligent speed limit may not work properly
in the following situations:
1 The detection performance of the front view camera
is affected.
2 The vehicle is being driven at high speed.
3 The speed limit sign is blocked by trees, frost, snow,
dust, etc.
4 The speed limit signs are incorrectly placed or
damaged.
5 There are multiple speed limit signs above or on the
side of the road. Currently, the front view camera can
only recognize the speed limit sign of the current lane.
6 Non standard speed limit signs or signs that contain
additional information.
7 The speed limit signs set up at a fork in the road, on a
bend or on-ramp/off-ramp.
8 During manoeuvres such as lane-changing.
216
9 The vehicle is driven in non-sales area or the units
selected on the infotainment display does not match
with the current country.
IMPORTANT
• In poor lighting conditions or poor weather, or in
case the speed limit signs are irregular or being
sheltered, the camera may not identify all speed limit
signs or make error identification (e.g, identify the
weight limit sign as a speed limit sign, identify the
minimum speed sign as the maximum speed sign etc.)
• The camera cannot recognize the text messages
provided below the speed limit sign, such as
Auxiliary Lane, 100 m Ahead, School Section,
7:00-10:00 . The camera will recognize the speed
limit sign with text messages as a normal speed limit
sign.
• Some drastic and rapid steering operations of the
driver may be judged as changing lane or turning
around in the intersection by the system, resulting
in the identified speed limit signs being cleared.
Advertisement
Table of Contents
