MG MG4 Owner's Handbook Manual page 191

• Manual operation: Pull up the EPB switch to turn on the
EPB system after the vehicle is parked safely. When the
vehicle is powered on, press the brake pedal and press
the EPB switch to turn off the EPB system.
• Automatic operation: Shift into P gear to turn on the
EPB system after the vehicle is parked safely. Park the
vehicle safely on a flat road or a road with a small slope,
start the power system, and shift into N , D or R gear
from P gear to turn off the EPB system.
If the indicator in the EPB switch and the indicator in the
instrument pack illuminate, it indicates that the EPB
system has been turned on. If the indicator in the EPB
switch and the indicator in the instrument pack
off, it indicates that the EPB system has been turned off.
Note: Always turn on the EPB system every time you
leave the vehicle.
Note: An audible motor noise may be heard when
turning on or off the EPB system.
Note: On a steep slope, shifting from P gear to other
gears will not turn off the EPB system. In this case,
please turn off the EPB system manually, or use the
Start Assist function of EPB .
STARTING & DRIVING
• DO NOT leave the vehicle before the indicator lamp
in the EPB switch illuminates and the gear indicator
displays P , the vehicle may not be safely parked due
to EPB failure and slip.
• In the event of a flat battery or power failure, it is
not possible to apply or release the EPB. In such a
case, 'booster cables' shall be used for emergency
vehicle start. Please refer to 'Emergency Starting' in
'Emergency Information' chapter.
goes
IMPORTANT
5
191