Printer Resetting - Kyocera FS FS-1920 Operation Manual

Configuration

Printer Resetting

The procedure described below resets the printer's temporary conditions,
such as the current unit of measurement, page orientation, font, character
code set, margins, etc., set by commands to their default values.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
>Printer Reset
5
Press the ENTER key. A question mark (?) appears.
>Printer Reset ?
6
Press the ENTER key again. Self test appears while the printer is
resetting itself, then Please wait followed by Ready.
Self test
Please wait
Ready
1-102
key repeatedly until Others > appears.
>
key repeatedly until >Printer Reset appears.