Kyocera KM-1530 User Manual page 59

1
2
3
4
User Guide
• When using a network port, select Enable manual duplex on network port in
the Compatibility Settings dialog box, accessed from the Device Settings tab.
Manual Duplex cannot be used on a network port in Windows 9x. See
Compatibility Settings
settings.
• The Source selection must be Cassette 1 or Cassette 2.
Print on Both Sides
In the Basic tab, select Cassette 1 or Cassette 2 from the Source list.
Select the Print on both sides (manual duplex) check box.
Select Flip on Long Edge or Flip on Short Edge.
Select Print manual duplex instructions to print an instruction sheet. Follow the
printed instructions for placing the pages back into the cassette after the first side is
printed.
- OR -
on page 2-14 for instructions on changing compatibility
Printing Basics
1
2
3
4
3-11