Kyocera KM-1530 User Manual page 146

PDL
PDL
printing system how to print a document. Availability of some printing options depends on the
selected PDL. Available page description languages are PCL XL, PCL 5e (monochrome
models only), PCL 5c (color models only), and KPDL.
Permanent job storage
al Hard disk. Jobs stored on the Hard disk can only be removed by manual deletion, so are
protected from being erased when the printing system is powered off or reset. For some mod-
els, a barcode can be printed on a Permanent print job.
Poster
by the printer so the cumulative sheets can be assembled as a poster. Use this feature to
print a document in a large, eye-catching poster format, up to 25 times larger than the original
document size.
PRESCRIBE
specified locations in a print job. See also Prologue/Epilogue.
Private print
digit Access code and stores them in RAM disk memory or an optional Hard disk. The job is
printed out at the operation panel by using the Access code.
Profile
select a profile by name and apply its settings to a print job without selecting each feature
individually.
Prologue/Epilogue
cations in the print job. An advanced user may choose to use this feature to embed a PRE-
SCRIBE command that will call a macro to overlay PRESCRIBE form data or a graphic
object, such as a logo or a signature, at a specific point in the print job.
Proof and hold
remaining copies in RAM disk memory or an optional Hard disk. Once the first copy has been
reviewed, the remaining copies can be printed or deleted at the printing system's operation
panel. Proof and hold jobs are stored temporarily and are deleted when the printing system
is reset or powered off.
Q
Quick copy
system's optional Hard disk temporarily for later access. The stored Quick copy jobs can be
accessed from the printing system's operation panel.
R
RAM disk
virtual hard disk for faster printing. RAM disk is not an attached device, but an allocation of
existing printing system memory. RAM disk is temporary. All data sent to RAM disk memory
will be lost when the printing system is reset or the power is turned off.
Resolution
of detailed printed images.
Reverse page order
last page to the first. This option is unavailable when Printer default is selected.
Rotate copies
stacks them in a collated, multi-copy print job. The final stack clearly distinguishes each copy
horizontally and vertically. For restrictions see
vi
Page Description Language. This is the language used by your computer to tell the
Job feature that stores print jobs in the printing system's option-
Layout feature for printing a document in a larger size than the maximum supported
Kyocera's scripting language that you can use to embed commands into
Job feature that sends secure print jobs to the printing system with a four-
A set of user defined driver settings that you save as a group. Once saved, you can
Advanced feature that allows you to insert a macro into specific lo-
Job feature that prints one copy of a multiple copy job and then stores the
Job feature that prints all copies of a job, then saves the job on the printing
A feature that lets you set up an area within the printing system memory as a
The number of dots printed in one inch. Higher resolution improves the quality
Print output option that sends a print job to a destination from the
Finishing mode that draws every other copy from a separate tray and
chapter.
Finishing
KX Driver