Kyocera KM-1530 User Manual page 102

Job
1
2
3
4
5
8-3
Temporary and Permanent Jobs
Functions for jobs saved as Temporary and Permanent jobs are similar to the
functions for Quick Copy and other features described in
page 8-1. However, these functions are provided for backward compatibility with
printing environments developed before the Job option. Similar to job options,
temporary and permanent jobs use electronic sorting for faster printing of jobs with
multiple copies.
Temporary jobs are saved until the disk becomes full or until the printing system is
reset or turned off. Permanent jobs are saved until manually deleted at the printing
system's operation panel or with KM-NET for Clients Job Manager.
The features are listed below:
• Jobs are managed internally with job IDs and printed after saving by an
application (KM-NET for Clients Job Manager).
• Barcode print output is supported and facilitates future printing with an optional
barcode reader.
• Both types of jobs are saved on the hard disk, up to the user-defined capacity.
However, temporary jobs are automatically deleted if the defined capacity is
reached. Permanent jobs remain saved until removed by the user.
Print and Save Temporary and Permanent Jobs
Note: Check that your printing system has an optional hard disk installed.
From the application's Print dialog box, open the Properties. (Select Print from the
File menu).
Open the Properties dialog box, and click the Job tab.
Select the Job Storage (e-MPS) check box.
Select Temporary or Permanent.
When printing a job with a job ID barcode, click Options to open the Barcode
Options dialog box and make the appropriate settings.
For further details, refer to
Note: Some models do not support the barcode feature.
Print a Barcode on a Print Job
Job Storage (e-MPS) on
on page 8-6.
KX Driver
1
2
3
4
5