Select Prologue/Epilogue File To Insert; Add; Edit; Delete - Kyocera KM-1530 User Manual

User Guide

Select Prologue/Epilogue File to Insert

From the list, select the name of a command file to insert into the print job. (If no file
names are visible in the list, you must click Add to browse for files on your computer
or network to add to the list.) Selecting a file enables the insertion point options for
that file in the dialog box.

Add

Click Add to browse your computer or network for command files. The files are plain
text format and typically have a file name extension of either .txt or .log.

Edit

Select a file name in the list, then click Edit. Microsoft Notepad opens for editing the
file text. To return to the Prologue/Epilogue dialog box, save any changes to the file
and exit Notepad.
Note: Editing a file changes the original file in the computer or network directory.

Delete

Select a Prologue/Epilogue file name, then click Delete. In the message box, click
Yes to confirm the deletion. To refuse the deletion, click No.
Note: The file name only is removed from the Prologue/Epilogue list. The original
file itself is not deleted; it remains in the computer or network directory.

Insertion Point

Each file in the list can be assigned only one insertion point. Choose one of the
following insertion point options:
Unassigned
The selected command file is not inserted into the print job. This is useful if the list
contains several command files, and you want to print some but not others. Select
Unassigned for the files you do not want to print.
Note: To disable all command files (thereby disabling the entire Prologue/Epilogue
feature), select [None] at the top of the file list.
Beginning of the print job
The command file is inserted as the first page of the print job. The document starts
printing on the second page.
End of the print job
The command file is inserted as the last page of the print job, which prints after the
last page of the document.
Note: The following Start of the page and End of the page insertion point options
are available only when PCL 5e or PCL 5c is selected as the PDL (Page Description
Advanced
9-2