Separation; Offset Jobs - Kyocera KM-1530 User Manual

Separation

User Guide
1 With Punch selected in the Finishing tab, click the Settings button.
2
In the Punch Position Settings dialog box, select where to place the hole punches
on the page: Left, Right, or Upper.
3
In the Punch Position Settings dialog box, click OK.
4 Click OK to return to the Print dialog box.
5 Click OK to start printing.
The print job will be punched by the finishing device and delivered to the output tray.
Note: Each sheet will be punched separately. When sheets are stacked, the holes
may not line up exactly.
You can increase the left or top margin to provide additional space for hole punches
by using the Gutter feature. For further details, refer to
When multiple copies of a print job are printed, they can be difficult to separate in the
output tray. The Separation feature stacks copies so that one can be clearly
distinguished from another. Available options are:
• Offset jobs physically shifts each print job in the output tray.
• Rotate copies stacks each copy of a print job at right angles in the output tray.
Note: Offset jobs and Rotate copies will not be available at the same time. Some
models do not support both options.

Offset Jobs

Offset jobs physically shifts each print job in the output tray. This feature requires an
optional finishing device such as a Booklet stitcher or Multi finisher. For further
details, refer to Installing Optional Devices
Note: To ensure consistent offset stacking, all users printing to the same printing
system should select Offset jobs as the default setting. For further details, refer to
Printer Properties on page 2-1.
1
From the application's Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.)
2
In the Basic tab, under Destination, select a face-down finishing tray, such as
Finisher (face-down) or Tray A (face-down).
Gutters on page 5-3.
on page 2-1.
Finishing
1
2
3
4
5
1
2
5-7