Start-Up Test - BWT PERMAQ COMPACT 41 Installation And Operating Manual

13.5 Start-up test

The start-up test sheet must be completed and filed together with the operating journal.
Name of customer:
Test of raw water
Temperature [°C]:
Softening unit (Option)
Type of plant:
Tick if "yes"
Time-controlled
New
RO-plant
Type of plant:
Permeate flow [l/h]:
Inlet press. switch PS1 is OK
Permeate tank (Option)
Type of plant:
Pre-pressured hydrophore is OK
Level switch have the right lengh for the tank
Status on start-up
Start-up by BWT
Problems on start-up
YES, there were problems at start-up
In case of problems, please fill in the problem report
Problem report
Can the problem be related to the manufacturing?
YES, the problem can be related to the manufacturing
Can the problem be related to the plant or the installation?
YES, the problem only concerns the plant
YES, the problem concerns both the plant and the installation
The plant - we mean only the part of the whole installation which was delivered by BWT (i.e only the plant).
The installation - we mean the piping etc. leading to the plant.
Can the problem be related to the sales department?
YES, the customer was misinformed
Description, please describe the problem
Signature
Name/initials of technician:
Start-up test
Plant number:
Conductivity [µS/cm]: Hardness [°dH]:
Hardness [°dH] after softening:
Quantity-controlled
Old
Raw -w ater pressure [bar]: Outlet press., high-press. pump [bar]: Conductivity, permeate [µS/cm]:
Concentrate flow [l/h]: Outlet press., permeate [l/h]:
Pressure switch PS2 (Start/Stop of pump) is OK
Pressure switch start/stop, transport pump is OK
Drainage protection, transport pump is OK
Start-up by dealer, specify dealer _____________________________________
Date:
Work-sheet number:
Inlet pressure [bar]:
Dimensioned correctly for RO
Plant and salt valve set at the correct hardness
Pre-pressured hydrophore is OK
NO, there were no problems at start-up
NO, the problem cannot be related to the manufacturing
YES, the problem only concerns the installation
NO, the problem does not concerns the plant or the installation
NO, the customer had been well-informed
Time consumption for the start-up [hours]:
UK
23