Global Asr (Gasr2); Global Fun2 (Gfun2); Global Lfo (Glfo2); Global Lfo Phase (Glfo2Ph) - Kurzweil K2600 Musician’s Reference

Control Sources
Main Control Source List
38
39
40
41
42
43
44
45
46
4-8

Global ASR (GASR2)

When the Globals parameter on the COMMON page is turned on, ASR2 becomes
global, and is labeled GASR2. The functions of ASRs are explained on page 6-42 of
the MusicianÕs Guide. This control source does not appear in the Control Source list
for parameters whose functions are local.

Global FUN2 (GFUN2)

When the Globals parameter on the COMMON page is turned on, FUN2 becomes
global, and is labeled GFUN2. The functions of FUNs are explained in Chapter 17 of
the MusicianÕs Guide. This control source does not appear in the Control Source list
for parameters whose functions are local.

Global LFO (GLFO2)

When the Globals parameter on the COMMON page is turned on, LFO2 becomes
global, and is labeled GLFO2. The functions of LFOs are explained on page 6-40 of
the MusicianÕs Guide. This control source does not appear in the Control Source list
for parameters whose functions are local.

Global LFO Phase (GLFO2ph)

When the Globals parameter on the COMMON page is turned on, LFO2 becomes
global, and is labeled GLFO2. The functions of LFOs are explained on page 6-40 of
the MusicianÕs Guide. This control source does not appear in the Control Source list
for parameters whose functions are local.
Global FUN 4 (GFUN4)
When the Globals parameter on the COMMON page is turned on, FUN 4 becomes
global, and is labeled GFUN4. This control source does not appear in the Control
Source list for parameters whose functions are local.
Volume Control (VolCtl)
This control source will always respond to MIDI Controller 07 messages. Assign this
value to a parameter when you want MIDI volume messages to affect the
parameter.
Pan Control (PanCtl)
This control source always responds to MIDI Controller 10 messages. Assign this
value to a parameter when you want MIDI pan messages to affect the parameter.
Balance Control (BalCtl)
This control source will always respond to MIDI Controller 08 messages. Assign this
value to a parameter when you want MIDI balance messages to affect the
parameter.
Channel Count (ChanCnt)
This control source keeps track of the total number of active voice channels (how
many notes are playing), and converts the number into a control signal between 0
and +1. The control signalÕs value is 1 when all 48 voice channels are active, and 0
when no voice channels are active.