Kurzweil K2600 Musician’s Reference page 124

KDFX Reference
KDFX Algorithm Specifications
the measure with interesting rhythmical patterns. Setting tap levels allows some ÒbeatsÓ to receive
different emphasis than others.
Parameters
Page 1
Wet/Dry
Fdbk Level
Xcouple
HF Damping
Page 2
LoopLength
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap4 Delay
Page 3
Tap1 Level
Tap2 Level
Tap3 Level
Tap4 Level
Page 4
Tap1 Bal
Tap2 Bal
Tap3 Bal
Tap4 Bal
Tempo
LoopLength
Tapn Delay
10-38
0 to 100%wet
0 to 100%
0 to 100%
16 Hz to 25088 Hz
0 to 32 bts
0 to 32 bts
0 to 32 bts
0 to 32 bts
0 to 32 bts
0 to 100 %
0 to 100 %
0 to 100 %
0 to 100 %
-100 to 100 %
-100 to 100 %
-100 to 100 %
-100 to 100 %
Basis for the delay lengths, as referenced to a musical tempo in bpm (beats per minute).
When this parameter is set to ÒSystemÓ, the tempo is locked to the internal sequencer
tempo or to incoming MIDI clocks. When it is set to ÒSystemÓ, sources (FUNs, LFOs, ASRs
etc.) will have no effect on the Tempo parameter.
The delay length of the Loop tap. If the feedback is turned up, this parameter sets the
repeating delay loop length. LoopLength sets the loop delay length as a tempo beat
duration. The tempo is speciÞed with the Tempo parameter and the delay length is given
in beats (bts). The delay length in seconds is calculated as beats/tempo * 60 (sec/min).
The delay lengths of the taps (n = 1...8) as tempo beat durations. The tempo is speciÞed
with the Tempo parameter and the delay length is given in beats (bts). The delay length in
seconds is calculated as beats/tempo * 60 (sec/min). Use the output taps to create
interesting rhythmic patterns within the repeating loop.
Out Gain Off, -79.0 to 24.0 dB
Tempo System, 1 to 255 BPM
Dry Bal -100 to 100%
Hold On or Off
Tap5 Delay 0 to 32 bts
Tap6 Delay 0 to 32 bts
Tap7 Delay 0 to 32 bts
Tap8 Delay 0 to 32 bts
Tap5 Level 0 to 100 %
Tap6 Level 0 to 100 %
Tap7 Level 0 to 100 %
Tap8 Level 0 to 100 %
Tap5 Bal -100 to 100 %
Tap6 Bal -100 to 100 %
Tap7 Bal -100 to 100 %
Tap8 Bal -100 to 100 %