Lfo Shapes Available For Dual Autopanner - Kurzweil K2600 Musician’s Reference

KDFX Reference
KDFX Algorithm Specifications
Sine
Figure 10-93
Parameters
Page 1
L In/Out
L Out Gain
Page 2
L LFO Rate
L RateScal
L Origin
L PanWidth
L CentrAtt
Page 3
R LFO Rate
R RateScal
R Origin
R PanWidth
R CentrAtt
In/Out
Out Gain
LFO Rate
Origin
Pan Width
CentrAtten
10-170
Saw+

LFO Shapes available for Dual AutoPanner

In or Out
Off, -79.0 to 24.0 dB
0 to 10.00 Hz
1 to 25088 x
-100 to 100 %
0 to 100 %
0 to 100 %
0 to 10.00 Hz
1 to 25088 x
-100 to 100 %
0 to 100 %
0 to 100 %
When set to ÒInÓ the auto-panner is active; when set to ÒOutÓ auto-panner is bypassed.
The overall gain or amplitude at the output of the effect.
The speed of the panning motion.
The axis for the panning motion. At 0%, panning excursion will be centered at the center
of the listening speakers. Positive values shift the axis to the right, while negative values
shift it to the left. At -100% or +100%, there is no room for panning excursion.
The amount of auto pan excursion. This value represents the percentage of total panning
motion available after Origin is set.
Amount the signal level is dropped as it is panned through the center of the listening
stereo speaker array. For the smoothest tracking, a widely accepted subjective reference is
PulseWidth
Saw- Pulse
R In/Out
R Out Gain
L LFO Shape
L PlseWdth
L
L C R
R LFO Shape
R PlseWdth
R
L C
Tri Expon
In or Out
Off, -79.0 to 24.0 dB
Tri
0 to 100 %
Tri
0 to 100 %