Kurzweil K2600 Install Manual

Rack and keyboard p/ram-26 program expansion module

Hide thumbs Also See for K2600:

Download this manual See also: Musician's Manual, Function Manual

Kurzweil K2600 Rack and Keyboard

P/RAM-26 Program Expansion Module Installation Kit

This document describes the procedure for adding the P/RAM-26 Program Expansion Module to a K2600 Keyboard or K2600

Rack instrument.

Before Beginning the Installation

Installation of the P/RAM Expansion Module will completely erase the K2600Õs RAM. Unlike a normal power-down, which

clears only the sample RAM, this installation will delete all user-defined objects: programs, setups, songs, intonation tables, ve-

locity and pressure maps, etc. Please be sure that the contents of RAM have been backed up before you begin this installation.

Back up all of these objects by entering Disk mode, pressing the Save soft button, and selecting the option ÒEverythingÓ to save

all RAM objects to a floppy or hard disk.

Static Precaution Instructions

The K2600 and P/RAM Expansion Module are sensitive to static electricity. Before handling the Expansion Module, touch the

K2600 chassis to discharge any static electricity from your body. Next, remove the option from its static protective bag. Hold the

option in one hand and then firmly grasp the K2600 chassis again with your other hand. This will minimize the possibility of

static damage to your K2600 and the Expansion Module.

Tools and Materials Required for Installation

#2 Phillips screwdriver

•

Two thick foam pads (Keyboard models only)

•

Figure 1. K2600 CPU Board, showing location of J803.

Part No. 910342

Page 1 K2600 chassis to discharge any static electricity from your body. Next, remove the option from its static protective bag. Hold the option in one hand and then firmly grasp the K2600 chassis again with your other hand. This will minimize the possibility of static damage to your K2600 and the Expansion Module.
Page 2 The P/RAM Expansion Module is static-sensitive. Follow the static precaution instructions on page 1 before handling any circuit board. Unplug all external wires, cables, and connectors from the K2600 and turn the unit so the keyboard faces you. Turn the keyboard upside down onto a soft surface, resting the front panel on two thick foam pads;...