Kurzweil K2600 Musician’s Reference page 185

Parameters
Page 1
In/Out In or Out
VibChInOut In or Out
Vib/Chor V1
Roto InOut In or Out
Page 2
Xover 16 to 25088 Hz
Lo Gain Off, -79.0 to 24.0 dB
Lo Rate -10.00 to 10.00 Hz
Lo Size 0 to 250 mm
Lo Trem 0 to 100%
Lo Beam W 45.0 to 360.0 deg
Page 3
LoMicA Pos -180.0 to 180.0 deg
LoMicA Lvl 0 to 100%
LoMicA Pan -100 to 100%
HiMicA Pos -180.0 to 180.0 deg
HiMicA Lvl 0 to 100%
HiMicA Pan -100 to 100%
Page 4
LoResonate 0 to 100%
Lo Res Dly 10 to 2550 samp
LoResXcurs 0 to 510 samp
ResH/LPhase 0.0 to 360.0 deg
In/Out When set to ÒInÓ, the algorithm is active; when set to ÒOffÓ the algorithm is bypassed.
Out Gain The overall gain or amplitude at the output of the effect. For distortion, it is often
necessary to turn the output gain down as the distortion drive is turned up.
VibChInOut When set to ÒInÓ the vibrato/chorus is active; when set to ÒOutÓ the vibrato/chorus is
bypassed.
Vib/Chor This control sets the Hammond B3¨ vibrato/chorus. There are six settings for this effect:
three vibratos ÒV1Ó, ÒV2Ó, ÒV3Ó, and three choruses ÒC1Ó, ÒC2Ó, ÒC3Ó
Roto InOut When set to ÒInÓ the rotary speaker is active; when set to ÒOutÓ the rotary speaker is
bypassed.
Out Gain Off, -79.0 to 24.0 dB
Dist Drive 0 to 96 dB
DistWarmth 16 to 25088 Hz
Cabinet LP 16 to 25088 Hz
Hi Gain Off, -79.0 to 24.0 dB
Hi Rate -10.00 to 10.00 Hz
Hi Size 0 to 250 mm
Hi Trem 0 to 100%
Hi Beam W 45.0 to 360.0 deg
LoMicB Pos -180.0 to 180.0 deg
LoMicB Lvl 0 to 100%
LoMicB Pan -100 to 100%
HiMicB Pos -180.0 to 180.0 deg
HiMicB Lvl 0 to 100%
HiMicB Pan -100 to 100%
HiResonate 0 to 100%
Hi Res Dly 10 to 2550 samp
HiResXcurs 0 to 510 samp
KDFX Reference
KDFX Algorithm Specifications
10-99