SE-12 Series Electrocardiograph User Manual
NOTE
U
is the a.c. mains voltage prior to application of the test level.
T
Guidance and manufacture's declaration – electromagnetic immunity
The 12-channel electrocardiograph is intended for use in the electromagnetic environment
specified below. The customer or the user of the 12-channel electrocardiograph should assure
that it is used in such an environment.
Immunity
IEC/EN 60601 test
test
Conducted
3 V
RF
150 kHz to 80 MHz
IEC/EN
6Vrms
61000-4-6
between
0.15 MHz and 80
MHz
3 V/m
Radiated RF
IEC/EN
and
70 % U
; 25/30
T
cycles )
Single phase: at
0°
0 % U
; 250/300
T
cycle
Electromagnetic immunity
level
3V
rms
150 kHz to
80 MHz
c)
in ISM bands
6Vrms
ISM
between 0.15
MHz and 80
MHz
3 V/m
and
70
% U
;
25/30
T
cycles )
Single phase: at 0°
0 % U
; 250/300
T
cycle
Compliance
Electromagnetic environment -
level
Portable and mobile RF communications
equipment should be used no closer to
any
electrocardiograph,
than
distance calculated from the equation
applicable to the frequency of the
transmitter.
Recommended separation distance
d
1
rms
c)
in
bands
d
1
- 100 -
EMC Information
power mains interruptions, it is
recommended
12-channel electrocardiograph
be
powered
uninterruptible power supply or
a battery.
guidance
part
of
the
including
the
recommended
2 .
P
2 .
P
80 MHz to 800 MHz
that
the
from
an
12-channel
cables,
separation