Table of Contents
Advertisement
Restore factory settings
9
Restore factory settings
The factory settings of the accessory can be restored. If you do
this, you will lose all your settings.
To restore the factory settings of the accessory, proceed as follows:
1.
Long press the system button (A) for 4 seconds (see figure
7)
»
The LED quickly starts flashing orange.
2.
Release the system button again.
3.
Long press the system button again for 4 seconds.
»
The LED lights up green.
4.
Release the system button to finish the procedure.
»
The accessory will perform a restart. After the restart, you can
again integrate your accessory into your DHC ecosystem.
22
Advertisement
Table of Contents
Need help?
Do you have a question about the homecontrols EKRUFHT61V3 and is the answer not in the manual?
Questions and answers