Working with the printer
Printing out the configuration page
Print out the configuration page in order to check the configuration of your
printer.
1
Make sure that:
❍
the "Fault" and "Paper" lamps are not on, and
❍
the "Stand-by" lamp is on constantly.
2
Press the control button briefly.
The configuration page is now printed out.
Continuing a print job after an error message
Continue the print job after the following error messages:
✔
when the print job is too complex and the memory capacity of the
printer is inadequate;
✔
when there is no more paper in the feed trays;
✔
when paper of a different format to that set in the printer driver was fed
into the printer.
1
Make sure that one of the above errors has occurred.
2
Press the control button in order to operate the page feed.
The print job continues.
Check the print-out!
If you have continued a print job after an error message, then check
the print-out. It is often the case that not all pages required are printed
out.
PagePro 4100E
7
7-5