MINOLTA-QMS PagePro 4100E User Manual page 151

10
Problem
Blank spots on the
print-out, text
missing
White or black lines
on the print-out
Toner smudges on
the print-out
10-14
Possible cause
The paper is moist because of
high humidity in the air or from
being splashed with water.
The imaging cartridge is
damaged.
The imaging cartridge is
damaged.
Insufficent toner in the cartridge.
The paper feed roller is dirty.
Troubleshooting
Action
Print the job again on dry paper.
Remove the imaging cartridge
and check it for damage. If
necessary, fit a new cartridge,
see page 9-5.
Remove the imaging cartridge
and check it for damage. If
necessary, replace it with a new
cartridge, see page 9-5.
Lift out the imaging cartridge and
shake it in order to improve the
distribution of the remaining
toner. If the problem persists, fit
a new cartridge, see page 9-5.
Clean the paper feed roller,
see page 9-2.
PagePro 4100E